четверг, 26 ноября 2009 г.

COS Panic: Int3 @ mp_register_ioapic

Коллеги, у кого ESX4 работает со сторонними агентами, перед обновлением до Update 1 ознакомьтесь со статьей в безе знаний http://kb.vmware.com/kb/1016070

Upgrading ESX 4.0 to 4.0 U1 using Update Manager fails or times out and rebooting the host results in a purple diagnostic screen
Symptoms
When attempting to upgrade ESX 4.0 to ESX 4.0 Update 1, you may experience the following symptoms:
  • Update Manager (VUM) upgrade operation fails or times out at 33%.
  • Upon reboot, the host that was being upgraded displays a purple diagnostic screen with the following error:

    COS Panic: Int3 @ mp_register_ioapic
Resolution
Who is affected
Customers using VMware vSphere 4 upgrading to Update 1 with 3rd party management agents running.
Solution
To avoid this issue, prior to the update, disable all 3rd party management agents running on the ESX 4.0.0 server before applying the update.
Note: The 3rd party management agents can be enabled after the upgrade is completed.
If you have already updated the ESX host, do not reboot the ESX host. Open a support request with VMware support. For more information, see How to Submit a Support Request.
WARNING: Rebooting the host means the host has to be reinstalled because it is not recoverable after a reboot.

WARNING: If you have virtual machines running on local storage, they may not be retained if you reinstall ESX 4.0 as a result of this issue. Contact VMware Support for assistance in recovering those virtual machines.

4 комментария:

  1. блин :)

    я как раз попал. Пошёл гуглить — и сразу этот твой пост.

    причём на блейдах (bl480 g1) всё прошло хорошо, пошёл обновлять dl580 g5 — и напоролся.

    ну, что можно сказать. Это, конечно же, реклама Hyper-V :)

    ОтветитьУдалить
  2. а то у нас венда давно BSODов не показыввала? После накатывания очередного SP...

    ОтветитьУдалить
  3. Сегодня ночью в UM свалился апдейт от этой дряни — http://kb.vmware.com/kb/1014797. Насколько рабочий — пока не проверял, так как сам по себе этот апдейт тоже требует перезагрузки хоста.

    Сам Update01 мне теперь тоже придётся переустановить — не смотря на то, что уже была установлена предыдущая версия (http://kb.vmware.com/kb/1014842).

    ОтветитьУдалить

Примечание. Отправлять комментарии могут только участники этого блога.